Checking Originals Before Sending Them (Test Print) - Canon 3300 Series Manual

Checking Originals Before Sending Them
(Test Print)
This mode enables you to scan and print documents under the same conditions as when
they are sent. This enables you to get an idea of how the document will look on the receiving
fax before you actually send it.
NOTE
•
Since the document's appearance depends on the receiving fax machine, it may look different from
the results of the Test Print mode.
•
Check documents one at a time when using the Test Print mode for documents placed on the platen
glass.
1
Place your originals and select the desired modes
Features"
2
Make sure the settings are OK, and press "Start Test Print."
The originals are scanned and printed using the current mode.
NOTE
•
To cancel printing, press "Cancel."
press "Test Print."

Checking Originals Before Sending Them (Test Print)

3
press "Special
3-23