Setting The Receive Start Speed - Canon 3300 Series Manual

2
3
6

Setting the Receive Start Speed

This function enables you to change the receive start speed when it takes too much time to
start receiving a document.
NOTE
•
The default settings is "33600bps."
1
Receive Start Speed
6-4 Setting Fax Management
Select the desired start speed, and press "OK."
Try reducing the send start speed from "33600bps" to "14400bps," "9600bps," "7200bps,"
"4800bps," and "2400bps," in this order.
Press "Done."
The specified mode is set.
Press "Done" repeatedly until the Fax Basic Features screen appears.
Call up the desired screen as follows:
(Additional
Functions)
When a Department ID and password are set, enter them after pressing "System Settings,"
and press (ID).