Canon 3300 Series Manual page 90

2
3
3-20 Specifying the Scanning Size of the Original (Document Size)
Set the scanning size for the documents.
When scanning at standard sizes:
Select one of the displayed sizes.
NOTE
•
"Auto" is the standard setting.
•
When specifying the size of an A or B size original, press "A/B-size."
When a specified size is registered:
Press "Other Size."
Select "Registered Size 1" or "Registered Size 2," and press "OK."
NOTE
•
"Registered Size 1" and "Registered Size 2," shown in the above figure, are displaying the
scanning sizes registered for the respective keys.