Checking and Changing the Status of
Sending Jobs
This section gives an explanation to check and change fax jobs. Please read Chapter 2
'Checking Job and Device Status' in the Reference Guide as well.
Canceling Transmission
You can cancel the transmission of a job after it has been scanned, while it is being sent, or
when it is ready to be sent.
NOTE
4
•
If you want to cancel sending while an original is being scanned, press "Cancel" on the touch panel
display or press
1
2
4-2
Checking and Changing the Status of Sending Jobs
(Stop) on the control panel.
Press "System Monitor," and press "Fax."
Select "TX Job Status."