Setting 2 On 1 Log - Canon 3300 Series Manual

Setting 2 On 1 Log

This feature enables you to print two received documents on a single sheet of paper in the
same paper series.
This function operates under the following conditions:
• The same paper drawer must be used for printing two or three consecutive pages of a
received document.
• The paper in the selected paper drawer must be large enough for two consecutive pages to
be printed on it.
- Example: If the LTR drawer is empty, and the 11" x 17" drawer has paper, you can print
two LTR documents onto a single sheet of 11" x 17" size paper.
NOTE
•
When 2 On 1 is set to "On," documents printed using 2 On 1 are typed with a broken line in the
middle. When a document is received with sender information included, a dotted line is printed
between the two pages.
•
The default setting for 2 On 1 Log is "Off."
1
Call up the desired screen as follows:
2 On 1 Log
2
Select "On," and press "OK."
When you do not want to set "2 On 1 Log," press "Off."
3
Press "Done."
The specified mode is set.
Press "Done" repeatedly until the Fax Basic Features screen appears.
(Additional
Functions)
Settings for Printing Received Documents
5
5-43