Canon 3300 Series Manual page 101

3
Select the job whose transmission you want to cancel, and press
"Cancel."
Press " " or " " if the job you want to select is not displayed on the TX Job Status screen.
4
Verify the sending destination.
When there is only one sending destination:
Press "Yes. "
Press "No" if you do not want to cancel transmission.
The message <Canceling> appears, and the alarm sounds.
For instructions explaining how to set the alarm volume, see 'Adjusting the Alarm Volume
and Monitor Volume,' on p. 5-9.
Checking and Changing the Status of Sending Jobs
4
4-3