Scanning During Warm-Up - Konica Minolta bizhub 361 User Manual

Before Making Copies
Note
A job can also be queued while the machine is warming up after the sub power switch is turned on. For
details, refer to
After the machine has finished warming up, the scanned image will be printed.
Refer to
1.3.2

Scanning during warm-up

1
Press the sub power switch.
– For details on turning on the machine, refer to
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] key
lights up in blue.
2
Check that the message "Warming up. Ready to scan." appears on the touch panel.
3
Position the original to be copied.
– For details on positioning the original, refer to
4
Specify any other desired copy settings.
5
Using the keypad, specify the desired number of copies.
– For details on specifying the number of copies, refer to
6
Press the [Start] key.
The original is scanned, and the job is added to the list of queued jobs.
– If the "Copy Operating Screen" parameter in Utility mode was set to "Yes", touch [Next Copy Job]
to display the Basic screen.
– After the machine has finished warming up, the jobs will automatically be printed.
501/421/361
"Scanning during warm-up" on page
"Main unit" on page 5-2
1-26.
for warm up time.
"Turning off the machine" on page
"Feeding the original" on page
"General copy operation" on page
1
1-27.
2-6.
2-2.
1-26