Copying With The Page Layout Of A Booklet ("Booklet" Function) - Konica Minolta BIZHUB C203 User Manual

Application functions
7.18

Copying with the page layout of a booklet ("Booklet" function)

The page order of the scanned original is automatically arranged to produce double-sided copies in a page
layout for center binding, such as for a magazine. Stapling is possible only when optional finisher FS-609 is
installed or optional finisher FS-519 is installed with the saddle stitcher attached.
!
Detail
Generally, a multiple of 4 original pages is required with a single-sided original, and a multiple of 2
original pages is required with a double-sided original. If there are not enough pages, blank pages are
automatically added at the end.
For details on stapling, refer to
setting/"Center Staple & Fold" setting)" on page
For an original that exceeds 100 pages, refer to
("Separate Scan" setting)" on page
The width of the binding margin is automatically specified.
1
Position the original to be copied.
– For details on positioning the original, refer to
2
Touch [Application], and then touch [Booklet].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
C353/C253/C203
"Left Bind" setting
8
7
3
2
1
8
7
REPORT
3
"Right Bind" setting
2
1
"Binding copies at the center ("Center Staple" and "Half-Fold"
2-8.
6 3
6 8 1 3
REPORT
8 1
3 6
6 1 8 6
REPORT
1 8
2-71.
"Scanning the original in separate batches
"Feeding the original" on page
7
2-6.
7-73