Inserting Paper Between Ohp Transparencies ("Ohp Interleave" Function) - Konica Minolta BIZHUB C203 User Manual
Hide thumbs
Also See for BIZHUB C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
3
3.22
Inserting paper between OHP transparencies ("OHP Interleave"
function)
In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat that
is produced during copying, paper (interleaves) can be inserted between the transparencies
0
No Finishing setting can be used.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 3-27.
–
For details on loading OHP transparencies, refer to "Paper types and paper capacities" on
page 3-80 and "Loading paper into the bypass tray" on page 3-23.
2
In the Basic screen, touch [Color], and then touch [Black].
–
Printing on OHP transparencies is possible only in black.
3
Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired paper
tray.
–
Use interleaf paper with the same size as the OHP transparencies.
4
Select [Transparency] as the paper type for the bypass tray, and then touch [OK].
–
For details on specifying the paper type settings, refer to "Specifying a setting for special paper" on
page 3-94.
3-100
Copy Operations
bizhub C203/C253/C353
Advertisement
Table of Contents
