Clearing Jammed Staples In The Saddle Stitcher - Konica Minolta bizhub C451 User Manual

Copy operations

Hide thumbs Also See for bizhub C451:

Table of Contents

Troubleshooting

Insert the staple car-

tridge holder, sliding it

along the rails in the

compartment.

Check that the staple

cartridge holder is

securely inserted as

far as possible.

Close the front door.

If stapling still cannot be resumed, even after performing the above pro-

cedure, contact your service representative.

Clearing jammed staples in the saddle stitcher

For details on clearing misfed paper in the finisher, refer to "To clear a pa-

per misfeed in Finisher FS-519" on page 4-80.

Remove all paper from the finisher.