Default Value
Phone Number
Description
Value Range
Default Value
VoIP Status
Description
Value Range
Default Value
2.3 Network
This section provides detailed descriptions about all the settings classified under the [Network] tab.
Document Version 2013-03
Not applicable.
Indicates the currently assigned phone numbers (reference only).
Note
•
The corresponding field is blank if a line has not yet been leased
or if the SIP-CS has not been configured.
Max. 32 digits
Not applicable.
Indicates the current VoIP status of each line of the SIP-CS to which
the S-PS is currently connected (reference only).
•
200 OK: The SIP-CS has been registered to the SIP server, and
the line can be used.
•
Registering: The SIP-CS is being registered to the SIP server, and
the line cannot be used.
•
Blank: The line has not been leased, the SIP-CS has not been
configured yet, or a SIP authentication failure has occurred.
•
DNS Error: Registration to the server failed due to a DNS error.
•
No Response: Registration to the server failed. There is no
response from the server.
•
SIP Error(xxx): Registration to the server failed. An error number
(xxx) was returned from the server.
•
Internal Status Error: Registration to the server failed due to an
internal cause.
Note
•
Immediately after starting up the SIP-CS, the phone numbers
of the lines will be displayed, but the status of the line may not
be displayed because the SIP-CS is still being registered to the
SIP server.
•
When not performing SIP registration, "-" is displayed.
Not applicable.
2.3 Network
Administrator Guide
61