Value Range
Default Value
CFG_FILE_KEY1
Value Format
Description
Value Range
Default Value
Document Version 2013-03
Max. 500 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 128 characters.
–
"<password>" must be less than 128 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
SIP-CS's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
SIP-CS's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
SIP-CS's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
SIP-CS's firmware version.
•
If this URL ends with "/" (slash), "system.cfg" is automatically
added at the end of the URL.
For example, CFG_SYSTEM_FILE_PATH="http://host/
dir/" becomes CFG_SYSTEM_FILE_PATH="http://
host/dir/system.cfg".
Empty string
Note
•
The URL specified by your dealer may be preset in the SIP-CS.
String
Specifies the encryption key (password) used to decrypt configuration
files.
Note
•
If the extension of the configuration file is ".e1c", the
configuration file will be decrypted using this key.
32-byte characters
Note
•
If an empty string is set for this parameter, decryption with this
value is disabled.
A unique value is preset to each SIP-CS and S-PS.
4.2.5 Provisioning Settings
Administrator Guide
181