Supports Session Timer (Rfc); Enable Ssaf (Sip Source Address Filter); Sip Settings - Ps - Panasonic KX-UDS124 Administrator's Manual

Value Range
Default Value
Supports Session Timer (RFC 4028)
Description
Value Range
Default Value
2.5.1.10 Security

Enable SSAF (SIP Source Address Filter)

Description
Value Range
Default Value

2.5.2 SIP Settings - PS

This screen allows you to check the SIP settings of S-PSs.
Document Version 2013-03
•
Yes
•
No
Note
•
If you select [Yes], the Reliability of Provisional Responses
function will be enabled. The option tag 100rel will be added to
the "Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message. If you select
[No], the option tag 100rel will not be used.
No
Specifies the length of time, in seconds, that the SIP-CS waits before
terminating SIP sessions when no reply to repeated requests is
received. For details, refer to RFC 4028.
0, 60–65535 (0: Disable)
0
Selects whether to enable SSAF (SIP Source Address Filter) for the
SIP servers (registrar server, proxy server, and presence server).
•
Yes
•
No
Note
•
If you select [Yes], the SIP-CS receives SIP messages only
from the source addresses stored in the SIP servers (registrar
server, proxy server, and presence server), and not from other
addresses. However, if [Outbound Proxy Server Address] in
2.5.1.3 Outbound Proxy Server is specified, the SIP-CS also
receives SIP messages from the source address stored in the
SIP outbound proxy server.
No
2.5.2 SIP Settings - PS
Administrator Guide 101