2.6.3 Call Control [PS]
2.6.3.1 PS Name
PS Name
Description
Value Range
Default Value
2.6.3.2 Call Control
Default Line for Outgoing
Description
Value Range
Default Value
2.6.3.3 Dial Plan
Dial Plan (max 500 columns)
Description
Value Range
Default Value
Call Even If Dial Plan Does Not Match
Description
116
Administrator Guide
Indicates the currently assigned name of the S-PS (reference only).
Max. 20 characters
Not applicable.
Selects the line used to make an outgoing call when no line is specified
in the dialing operation.
Note
•
The available line number may vary depending on the type of
the SIP-CS being used.
1–2
1
Specifies a dial format, such as specific phone numbers, that control
which numbers can be dialed or how to handle the call when making a
call. For details, see 6.2 Dial Plan.
Max. 500 characters
Note
•
Entering more than 500 characters in this field causes an error
and the previous value remains effective.
Not stored.
Selects whether to enable dial plan filtering so that a call is not made
when the dialed number does not match any of the dial formats
specified in [Dial Plan].
Document Version 2013-03