2.7.4 All Firmware Update
Default Value
PS Update Type
Description
Value Range
Default Value
2.7.4 All Firmware Update
This screen allows you to manually update the firmware of all SIP-CSs from a PC by clicking [All Update
Firmware].
Note
•
After the firmware has been successfully updated, the SIP-CS will restart automatically.
140
Administrator Guide
Not stored.
Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the S-PS detects a newer
version of firmware.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the SIP-CS.
•
Automatic
•
Manual
Automatic
Document Version 2013-03