6.3.1 Flexible Button Settings
Example: "[2346789]11|01[2-9]x.|[2-9]xxxxxxxxx"
•
If the dialed phone number is "21234567", "598765432" and so on when [Call Even If Dial Plan Does Not
Match] is set to [Yes], the call is made after the inter-digit timer expires.
•
If the dialed phone number is "21234567", "598765432" and so on when [Call Even If Dial Plan Does Not
Match] is set to [No], the call is denied after the inter-digit timer expires.
No Match:
Example: "[2346789]11|01[2-9]x.|[2-9]xxxxxxxxx"
•
If the dialed phone number is "0011", "1011" and so on when [Call Even If Dial Plan Does Not Match] is
set to [Yes], the call is made after the inter-digit timer expires.
•
If the dialed phone number is "0011", "1011" and so on when [Call Even If Dial Plan Does Not Match] is
set to [No], the call is denied.
6.3 Flexible Buttons
You can customize the flexible buttons on the S-PS. They can then be used to make or receive outside calls
or as feature buttons. These settings can be programmed either through the Web user interface (® see
2.6.6 Button Settings - PS) or by configuration file programming (® see 4.4.5 Flexible Button Settings).
Note
•
If the flexible button settings for an S-PS are changed through the Web user interface, the calls via the
target S-PS will be disconnected.
•
This feature may not be supported on your phone system.
The following types of flexible buttons are available:
Button
DN
Used to seize the line assigned to the DN (Directory
Number) button. When a call arrives at the DN
button, pressing the button answers the call.
Notice
Note
One-Touch
Used to access a desired party or system feature
using the One-Touch Dialing feature.
6.3.1 Flexible Button Settings
To set Flexible Buttons
1.
In the Web user interface, click the [Telephone] tab, and then click [Button Settings].
2.
Click a numbered tab to find the appropriate S-PS, and then click [Button Settings] for that S-PS.
262
Administrator Guide
Description
•
At least 2 DN buttons must be assigned to
each line. If DN buttons are not assigned,
calls cannot be made or answered.
•
The shared line (shared call) feature is an
optional feature and may not be supported
on your phone system.
Lamp Indication
Off: Idle
Green on: The extension is on a call
using the DN button.
Flashing green rapidly: The DN
extension is receiving an incoming call.
Flashing green slowly: A call is on
hold at the DN extension.
Red on: A shared line is in use or on
hold (private).
Flashing red slowly: A shared line is
on hold (normal).
–
Document Version 2013-03