Value Range
Default Value
SIP_CONTACT_ON_ACK
Value Format
Description
Value Range
Default Value
SIP_TIMER_B
Value Format
Description
Value Range
Default Value
SIP_TIMER_D
Value Format
Description
Value Range
Default Value
SIP_TIMER_F
Value Format
Description
Value Range
Document Version 2013-03
•
Y (Enable username check)
•
N (Disable username check)
Note
•
If set to "Y", the SIP-CS will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
•
If set to "N", the SIP-CS will not check the username part of the
SIP URI in the "To" header.
N
Boolean
Specifies whether to add the "Contact" header to SIP ACK message.
•
Y (Add the "Contact" header)
•
N (Do not add the "Contact" header)
N
Integer
Specifies the value of SIP timer B (INVITE transaction timeout timer),
in milliseconds. For details, refer to RFC 3261.
250–64000
32000
Integer
Specifies the value of SIP timer D (wait time for answer resending), in
milliseconds. For details, refer to RFC 3261.
0, 250–64000
5000
Integer
Specifies the value of SIP timer F (non-INVITE transaction timeout
timer), in milliseconds. For details, refer to RFC 3261.
250–64000
4.6.2 SIP Settings
Administrator Guide
237