Downloading Configuration Files - Panasonic KX-UDS124 Administrator's Manual

3.2.4 Downloading Configuration Files

not need to perform provisioning. In this case, the Standard and Product configuration files can also only be
used by the Super Master CS.
Depending on the situation, you can use all 4 types of configuration files, and can also use only a Master
configuration file.
The above example shows only one possible way to use configuration files. Depending on the requirements
of your dealer, there are a number of ways to use configuration files effectively.
3.2.4 Downloading Configuration Files
Downloading a Configuration File via the Web User Interface
The following procedure describes how to enable downloading a configuration file via the Web User Interface
to be used for programming the SIP-CS.
1.
Confirm that the provisioning server's IP address/FQDN and directory are correct, and store the
configuration files in the directory (e.g., http://provisioning.example.com/Panasonic/Config_Sample.cfg).
2.
Enter the IP address of the SIP-CS into the PC's Web browser.
3.
Log in as the administrator.
4.
Click the [Maintenance] tab, click [Provisioning Maintenance], and then select [Yes] for [Enable
Provisioning].
5.
Enter the URL set up in Step 1 in [Standard File URL].
6.
Click [Save].
Timing of Downloading
A SIP-CS downloads configuration files when it starts up, at regular intervals, and when directed to do so by
the server. In addition, you can prohibit SIP-CSs from downloading the configuration files. For details about
the settings, see 2.7.5 Provisioning Maintenance and 4.2.5 Provisioning Settings.
Download Timing
Startup
154 Administrator Guide
The configuration files are downloaded when the SIP-CS starts up.
Explanation
Document Version 2013-03