Panasonic KX-UDS124 Administrator's Manual page 273

Restoring the configuration data
1.
While the SIP-CS is on, press the RESET switch on the back of the SIP-CS for about 10 seconds. For
details, see 9.1 Resetting to Factory Default.
2.
Log in to the Super Master CS as the administrator.
3.
In the [Maintenance] tab, select [Restore].
4.
In [File Name], enter the full path to the file that you want to import, or click [Browse] to select the
configuration or settings file that you want to restore.
5.
Click [Restore].
Note
•
If the unit's firmware version changes between backup and restore, the data may not be restored.
For details, refer to "Failed (Firmware Version Mismatch)" in Result Messages in 2.1.3 Web User
Interface Setting List.
•
If the Web settings were changed after the backup file was created, the S-PSs near the restored Super
Master CS will function according to older Web settings.
To use the most recent settings, log in to the Web user interface for the Super Master CS and
reconfigure the settings.
Document Version 2013-03
8.1 How to back up and restore configuration data
Administrator Guide 273