Overview Of Programming - Panasonic KX-UDS124 Administrator's Manual

1.1 Overview of Programming

1.1 Overview of Programming
There are 2 types of programming, as shown in the table below:
Programming
Type
Web user
interface
programming
Configuration file
programming
All programming is controlled by the Super Master CS. When programming is performed on the Super Master
CS, all necessary configuration data is distributed to all other Air Sync Master CSs and Slave CSs.
For details about the different types of SIP-CSs, refer to the Installation Guide on the Panasonic Web site
(® see Introduction).
Air Sync Group 1
Super
Master CS
Slave CS
Slave CS
Slave CS
20 Administrator Guide
Description
Configuring the SIP-CSs settings by accessing the
Web user interface from a PC connected to the same
network.
Configuring the SIP-CSs settings beforehand by
creating configuration files (pre-provisioning), and
having the SIP-CS download the files from a server on
the Internet and configure its own settings
(provisioning).
Air Sync Group 2
Air Sync
Master CS
Slave CS
Slave CS
Slave CS
References
® Section 2 Web User
Interface Programming
® Section 3 General
Information on Provisioning
® Section 4 Configuration
File Programming
Air Sync Group n
Air Sync
Master CS
Slave CS
Slave CS
Slave CS
Document Version 2013-03