4.5.2 RTP Settings
DSCP_RTCP
Value Format
Description
Value Range
Default Value
RTCP_INTVL
Value Format
Description
Value Range
Default Value
MAX_DELAY
Value Format
Description
Value Range
Default Value
MIN_DELAY
Value Format
Description
Value Range
Default Value
212
Administrator Guide
Integer
Selects the DSCP level of DiffServ applied to RTCP packets.
0–63
0
Integer
Specifies the interval, in seconds, between RTCP packets.
5–65535
5
Integer
Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
3–50 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than "NOM_DELAY"
–
This value must be greater than "MIN_DELAY"
–
"NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
20
Integer
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "NOM_DELAY"
–
This value must be less than "MAX_DELAY"
–
"MAX_DELAY" must be greater than "NOM_DELAY"
2
Document Version 2013-03