Value Range
Default Value
Synchronize Do Not Disturb and Call Forward
Description
Value Range
Default Value
2.6.4.4 Call Features
Block Caller ID
Description
Value Range
Default Value
Block Anonymous Call
Description
Value Range
Document Version 2013-03
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
Selects whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface, between the SIP-CS
and the portal server that is provided by your dealer.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your dealer.
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Yes
•
No
No
Selects whether to make calls without transmitting the phone number
to the called party.
Note
•
Availability depends on your phone system.
•
Yes
•
No
No
Selects whether to reject incoming calls that do not show the caller's
number.
•
Yes
•
No
2.6.4 Call Control [Line 1–2]
Administrator Guide
119