Station Hunting Type - Panasonic KX-TD816 Programming Manual

[106] Station Hunting Type

Description
Used to enable or disable hunting and set the Station Hunting type for each extension group.
There are six Station Hunting types available:
Circular: all of the extensions in the group are searched until an idle one is found.
Termination: searching stops at the extension which has the largest jack number in the group.
Voice Mail (VM): all of the VM ports of an extension group are searched until an idle one is
found which allows Voice Mail Service.
Automated Attendant (AA): all of the AA ports of an extension group are searched until an
idle one is found which allows AA Service.
Ring Group: all of the extensions in the ring group ring simultaneously.
Uniform Call Distribution (UCD): group members are hunted in a circular way.
Selection
• Extension group number: 1 through 8,
• Disable (no hunting) / Terminate (termination) / Circular / VM (voice mail) /
AA (automated attendant) / RING / UCD
Default
All extension groups – Disable
Programming
1.
Enter 106.
Display: 106 STATION HUNT
2.
Press NEXT.
Display: EXT GRP NO?
3.
Enter an extension group number.
To enter extension group number 1, you can also press NEXT.
Display example: Group1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another extension group, press NEXT or PREV, or SELECT and the
desired extension group number.
7.
Repeat steps 4 through 6.
8.
Press END.
General Programming
2.2 System Programming
( = all extension groups)
63