Table of Contents
Advertisement
Main Menu
Seat Adjustments
To stop the automatic adjustment,
press any button on the control panel:
MEMO, 1, or 2.
To select a memorized seat position
with the driver's door closed, press
and hold the desired memory button
until the seat adjustment is complete.
You will hear two beeps when it has
finished. To stop the adjustment,
release the memory button.
If desired, you can use the seat
adjustment switches to change the
seat position after it adjusts to the
memorized position. To keep this
seat position for later use, you must
store it in the seat position memory.
Instruments and Controls
Table of Contents
Memory Seat-back Angle Limit
The seat memory adjusts the seat-
back angle only within a certain
range. If the seat-back angle you
stored in the memory is beyond this
range, automatic adjustment stops at
the limit and you will hear three
beeps. To continue the automatic
adjustment, press and hold the
appropriate memory button. When
the seat-back reaches the memorized
position, you will hear two beeps.
The seat-back is reclined very far at
the memory's limit. Driving with the
seat back reclined at or beyond this
limit greatly increases the possibility
of sliding under the seat belt in a
crash.
Rear Seat Armrest
TAB
The rear seat armrest is located at
the center of the rear seat. Pull the
tab to use the armrest.
Advertisement
Table of Contents
