Table of Contents
Advertisement
Main Menu
1. Start the engine. Turn the heater
temperature control dial to maxi-
mum heat and turn off the engine.
Open the hood. Make sure the
engine and radiator are cool to the
touch.
2. Remove the radiator cap.
Table of Contents
3. Loosen the drain plug on the
bottom of the radiator. The
coolant will come out through the
hole in the splash cover.
Cooling System
RESERVE TANK
4. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then p u t the
tank back in its holder.
5. When the coolant stops draining,
tighten the radiator drain plug.
Maintenance
CONTINUED
Advertisement
Table of Contents
