Table of Contents
Advertisement
Main Menu
Engine Belts
Check the condition of the two
engine belts. Examine the edges of
each belt for cracks or fraying.
Check the tension of each belt by
pushing on it with your thumb
midway between the pulleys. You
should not be able to deflect the belt
more than 3/4 in (19 mm).
Table of Contents
If you see signs of wear or looseness,
have your dealer adjust or replace the
belts. Your dealer will check these
belts as part of the normal scheduled
maintenance.
Engine Belts, Tires
Tires
Check the inflation and condition of
your car's tires at least once a month.
Inflation
Check the pressure in the tires when
they are cold. This means t h e car
has been parked for at least three
hours. If you have to drive t h e car
before checking the tire pressure,
the tires can still be considered
"cold" if you drive less than one mile.
If you check the pressure when the
tires are hot (the car has been driven
several miles), you will see readings
4 to 6 psi higher than the cold read-
ing. This is normal. Do not let air
out to match the specified cold
pressure. The tire will be underin-
flated.
Maintenance
CONTINUED
Advertisement
Table of Contents
