Main Menu
Lights
Replacing Bulbs in the Rear
The bulbs for the taillights, brake
lights, rear turn signals, side marker
lights, back-up lights and high-mount
brake lights are reached from inside
the trunk.
Maintenance
Table of Contents
1. Remove the taillight assembly
cover by unscrewing the knob. Lift
the cover up and off.
2. Determine which bulb is burned
out. The bulbs are mounted in two
separate bulb holder assemblies.
Determine which assembly you
need to remove.
3. Use a phillips head screwdriver to
remove the mounting screw from
the bulb holder assembly. Pull the
assembly straight out without
twisting it.
4. Remove the bulb by turning it one-
quarter turn to the left and pulling
it out of the socket.
KNOB
5. Install the new bulb in the socket.
MOUNTING
6. Reinstall the bulb holder assembly
SCREW
by lining up the bulbs with their
holes in the lens assembly then
pushing the bulb holder assembly
onto the tabs. Reinstall the mount-
ing screw, tighten it securely.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the taillight assembly
cover.