Table of Contents
Advertisement
Main Menu
JACKING POINT
9. Find the jacking point nearest the
wheel you are removing. Place the
jack under the jacking point. Turn
the end bracket clockwise until
the top of the jack contacts the
jacking point. Make sure the
jacking point tab is resting in the
jack notch.
Table of Contents
10. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
WHEEL WRENCH
11. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the aluminum wheel
facing up. The outside surface
contacting the ground could
damage the wheel surface.
Taking Care of the Unexpected
Changing a Flat Tire
CONTINUED
Advertisement
Table of Contents
