Table of Contents
Advertisement
Main Menu
Climate Control (L/Std. model)
To Heat
To warm the interior, press
Set the fan to the desired speed.
Adjust the warmth of the air with the
temperature control dial.
To warm the interior rapidly after the
car has been sitting out in cold
weather:
1. Start the engine.
2. Select
and
3. Turn the temperature control dial
to maximum heat.
4. Leave the fan OFF for the first few
minutes. When the temperature
gauge rises above the blue mark,
set the fan to medium speed.
5. When the interior warms up,
switch to fresh air mode and adjust
the temperature control dial to a
comfortable setting.
Comfort and Convenience Features
Table of Contents
To Defrost
To remove frost or ice from the
and
windshield and side windows after
the car has been sitting out in cold
weather.
1. Start the engine.
2. Select
and
3. Set the fan and temperature
controls to maximum.
These settings direct all the air flow
to the defroster vents at the base of
the windshield and each door win-
dow. The air flow will get warmer and
clear the windows faster as the
engine warms up. You can close the
side vents with the tab in each vent.
That will send more warm air to the
windshield defroster vents.
For safety, make sure you have a
clear view through all the windows
before driving away.
To Turn Everything Off
To shut off the system temporarily,
turn the fan speed and temperature
control dials all the way OFF.
You should only shut the system
completely off for the first few
minutes of driving in cold weather,
until the engine coolant warms up
enough to operate the heater. Keep
the fan on at all other times so stale
air does not build up in the interior.
Advertisement
Table of Contents
