Table of Contents
Advertisement
Main Menu
BLADE
4. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Table of Contents
REINFORCEMENT
5. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal reinforce-
ment strips from the old wiper
blade and install them in the slots
along the edge of the new blade.
6. Slide the new wiper blade into the
holder until the tabs lock.
BLADE
7. Slide the blade assembly onto the
wiper arm. Make sure it locks in
place.
8. Raise the wiper arm slightly.
Lower the wiper arm down against
the windshield.
Windshield Wipers
Maintenance
Advertisement
Table of Contents
