Table of Contents
Advertisement
Main Menu
Audio System (LS model)
Cassette Search Functions
You can use the preset buttons to
control tape movement while playing
a cassette. Four functions are avail-
able: FF, REW, REPEAT, and SKIP.
Press FF to fast forward the tape.
Press REW to rewind the tape. To
stop fast forward or rewind, press
PLAY. Fast forward or rewind stops
automatically at the end of the tape.
The system reverses direction, then
begins to play.
The REPEAT function plays the
current song or passage over again.
Press REPEAT to enable it. The light
in the button stays lit to remind you.
When the system senses a silent
period in the program (such as the
end of a song), it rewinds the tape to
the previous silent period. It contin-
ues to repeat this same passage as
long as REPEAT is on. Press the
REPEAT button to turn it off. Press-
ing REW or FF also turns off RE-
PEAT.
Comfort and Convenience Features
Table of Contents
SKIP
The SKIP function lets you skip over
a song or other passages. When you
press this button, the system goes
into fast forward until it senses a
silent period on the tape. It then goes
back to PLAY.
If you are not interested in that
passage, leave the system alone.
After ten seconds, it returns to fast
forward until it senses the next silent
passage, then goes back to PEAY.
This continues until you press SKIP
FORWARD
REWIND
REPEAT
again or it reaches the end of the
cassette.
The REPEAT and SKIP functions use
silent periods on the tape to find the
end of a selection. These features
may not work satisfactorily on tapes
that have almost no gap between
songs, a high noise level between
songs, or silent periods in the middle
of songs.
Advertisement
Table of Contents
