Table of Contents
Advertisement
Main Menu
Replacing a Headlight Bulb
Your car has two bulbs on each side,
four in total. Make sure you are
replacing the bulb that is burned out.
Your car uses halogen headlight
bulbs. When replacing a bulb, handle
it by its plastic case and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
NOTICE
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a
scratch on the glass can cause the
bulb to overheat and shatter.
Table of Contents
1. Open the hood.
2. Remove the cover from the back
of the burned-out bulb by turning
it counterclockwise.
3. Remove the electrical connector
from the bulb by pushing the lock
tab outward while you push down
on the connector.
4. Unclip the end of the hold-down
wire from its slot. Pivot the wire
up out of the way and remove the
bulb.
5. Insert the new bulb into the hole,
making sure all the tabs are in
place. Pivot the hold-down wire
over the end of the bulb and clip
the end back into the slot.
6. Push the electrical connector
back onto the bulb. Make sure it
is on all the way.
7. Replace the bulb cover. Line up
the three tabs, push the cover in,
and turn it clockwise until it locks.
Make sure the word " T O P " on
the bulb cover is at the top
position.
8. Test the headlights.
Maintenance
Lights
CONTINUED
Advertisement
Table of Contents
