Main Menu
Lights
VERTICAL ANGLE GAUGE
BUBBLE
5. Check the vertical adjustment
indicator. The bubble should be
centered underneath the longest
scribe mark on the gauge.
Maintenance
Table of Contents
HORIZONTAL
ADJUSTMENT
6. If either indicator is not aligned
with its "0" mark as described
above, an adjustment can be made
using a phillips screw driver to
realign it with the "0" mark.
Please refer to the illustrations.
VERTICAL
ADJUSTMENT
7. If you cannot align it with the "0"
mark, your car may have suffered
body damage near t h e headlight, a
new headlight assembly was in-
stalled, or a suspension problem
raises or lowers one end of the car.
Please contact your Acura dealer.