System Setup; Default Settings; Prerequisites; First Sign-In And Initial System Setup - Bosch DIVAR IP all-in-one 6000 User Manual

Hide thumbs Also See for DIVAR IP all-in-one 6000:
Table of Contents

Advertisement

DIVAR IP all-in-one 6000
4

System setup

4.1

Default settings

All DIVAR IP systems are preconfigured with a default IP address and with default iSCSI
settings:
Default user settings for administrator account
4.2

Prerequisites

Observe the following:
4.3

First sign-in and initial system setup

Notice!
i
Do not change any operating system settings. Changing operating system settings can result
in malfunctioning of the system.
Notice!
i
To perform administrative tasks, you must sign in to the administrator account.
Notice!
i
In case of password loss a system recovery must be performed as described in the
installation manual. The configuration must be done from scratch or must be imported.
To setup the system:
1.
2.
3.
Bosch Security Systems B.V.
IP Address: automatically assigned by DHCP (fallback IP address: 192.168.0.200).
Subnet mask: automatically assigned by DHCP (fallback subnet mask: 255.255.255.0).
User name: BVRAdmin
Password: to be set at first sign-in.
Password requirements:
Minimum 14 characters.
At least one upper case letter.
At least one lower case letter.
At least one digit.
DIVAR IP needs to have an active network link during installation. Make sure that the
network switch you are connecting to is powered on.
The default IP address must not be occupied by any other device in the network. Make
sure that the default IP addresses of existing DIVAR IP systems in the network are
changed before adding another DIVAR IP.
Connect the DIVAR IP all-in-one unit and the cameras to the network.
Turn on the unit.
Setup routines for Microsoft Windows Server IoT 2022 for Storage Workgroup are
performed. This process can take several minutes. Do not turn off the system.
After the process is completed, the Windows language selection screen is displayed.
Select your country/region, the desired operating system language and the keyboard
layout from the list, then click Next.
The Microsoft software license terms are displayed.
User manual
System setup | en
2022-10 | V01 | F.01U.408.604
9

Advertisement

Table of Contents
loading

Table of Contents