Summit X450E-48P Switch - Extreme Networks Summit X250e-24t Hardware Installation Manual

Summit X450e-48p Switch

The front panel of the Summit X450e-48p switch
Forty-four fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1-44) that provide high-density
●
copper connectivity and a full 15.4 Watts of PoE per port when used with the EPS-C/EPS-600LS
Four combination ports (ports 45-48) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
NOTE
All 48 ports are capable of providing PoE power
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 45: Summit X450e-48p Switch Front Panel
2 4 6 8 10 12 14 16
Stack 10G 1 3 5 7 9 11 13 15
1 1
2 2
MGMT
STACK NO.
FAN
PSU-1
PSU-E
Stack number
indicator
The rear panel of the Summit X450e-48p switch
Slot for one of the following Summit option cards:
●
Summit XGM2-2xn option card, which allows you to add up to two 10-Gigabit XENPAK modules
■
Summit XGM2-2xf option card, which allows you to add up to two 10-Gigabit XFP modules
■
For information about these Summit option cards, see
page 149 or "Summit XGM2-2xf Option Card" on page
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-C chassis (Model No. 10912).
●
This chassis can hold up to three EPS-600LS External Power Modules (Model No. 10913). The
connecting redundant power supply cable is shipped with the EPS-C chassis.
The PoE capability of the Summit X450e-48p switch varies depending on the number of external
power modules in use. For more information, see
and "EPS-600LS External Power Module" on page
AC power input socket
●
The power supply operates from 100 VAC to 240 VAC.
Summit Family Switches Hardware Installation Guide
(Figure
57.
18 20 22 24 26 28 30 32 34
17 19 21 23 25 27 29 31 33
10/100/1000 Mbps ports
(Figure
45) includes:
"Summit X450, X450a, and X450e Series
Combination ports
36 38 40 42 43 44 45 46 48 46X 48X Solid ON = Link
35 37 39 41 47 45X 47X
Blinking = Activity
Shared Ports
Console
port
SH_030B
46) includes:
"Summit XGM2-2xn Option Card" on
150.
"Summit X450e-48p Power Supplies" on page 56
69.
55