Summit X250E-48T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X250e-48t Switch

The front panel of the Summit X250e-48t switch
Forty-eight fixed autosensing 10/100BASE-T ports (ports 1–48) that provide 4.8 Gbps of high-density
●
copper connectivity
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 42.
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
●
Figure 17: Summit X250e-48t Switch Front Panel
Stack number indicator
The rear panel of the Summit X250e-48t switch
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
●
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)" on page 122
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 18: Summit X250e-48t Switch Rear Panel
Management port
Stacking ports
Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
External power
supply connection
Power socket
Summit X250e Series Switches
17) includes:
"Combination Ports and Failover" on page
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_044B
18) includes:
for more information.
22.
"EPS-160
SH_045
37