Copying From The Bypass Tray - Ricoh FT7950 Operating Instructions Manual

COPYING

COPYING FROM THE BYPASS TRAY

Use the bypass tray to copy onto OHP trans-
parencies, adhesive labels, translucent
paper, post cards, and copy paper that cannot
be set in the paper tray.
Note
For details about the size, maximum sheet
count, and orientation of the paper that can
be set in the bypass tray, see ⇒ P.21 "Copy
Paper."
The number of sheets that can be set in the
bypass tray varies with the type of paper.
Make sure that the maximum sheet count
is not exceeded. See ⇒ P.21 "Copy Pa-
per."
You cannot select the following functions
for the bypass tray:
• Auto Paper Select
• Auto Reduce/Enlarge
• Sort/Stack/Staple
• Punch
• Duplex/Combine/Series Copies
• Erase Border, Erase Center/Border
• Centering
• Margin Adjustment
36
1
Open the bypass tray.
[Bypass Tray] is selected.
2
Adjust the guides to copy paper size.
Important
If the guides are not flush with the copy
paper, a skew image or paper misfeeds
might occur.
3
Lightly insert the copy paper face up.
The indicator on the display is automati-
cally illuminated.
PG6A1101