Sample Copy - Ricoh FT7950 Operating Instructions Manual

COPYING
2
Define the contents of a Presetting Copy
Job.
Note
Press the [Cancel] key to cancel the con-
tents of the Presetting Copy Job being ed-
ited.
3
Set your originals in the document feeder
and press the [OK] key.
Processing of the Presetting Copy Job au-
tomatically starts after the current copy pro-
cessing is completed.

Sample Copy

You can make a test copy and check the fin-
ishing before or during a copy session to
verify the density, reproduction ratio, margin
adjustment, save/delete area, and centering sta-
tus.
Note
A copy sheet is generated during a test
copy according to the current settings, re-
gardless of the current number of copies
setting.
42
1
Select the functions you want to use and
enter the number of copies.
2
Set your originals.
Note
Press the {Clear/Stop} key to make a test
copy in the middle of a copy session.
3
Press the {Sample Copy} key.
The machine copies and generates one
sheet.
Note
Press the {#} key to suppress the genera-
tion of the copy.
4
After examining the finishing, press the
{Start} key if the test copy proves nor-
mal.
Note
To change a setting after examining the fin-
ishing, select and reset the corresponding
function.
2-Sided is selected, the machine performs
a 2-sided copy for the original that is set in
the document feeder or on the exposure
glass and generates a sheet with both sides
copied.
Sort or Stack functions cannot select the
Sample Copy together when your copier
is equipped with the S/S hanging-on type.
The Thick Paper mode cannot select the
Sample Copy together when your copier
is equipped with the S/S console type.
The Sample Copy cannot select when the
Duplex mode is interrupted.