Table of Contents
Advertisement
COPYING
ERASE BORDER
This function erases all four sides of the origi-
nal image.
Note
You can specify the wide of the border to
be erased within the range of 0 - 20 mm in
2.5 mm steps (0 - 0.8" in 0.1" steps.)
The initial erasure width is 5 mm(0.2" ).
You can change this initial value. See ⇒
P.99 "Erase Border Width priority setting."
Use the Erase Center/Border function to
specify the width of the top, bottom, left,
and right borders individually. See ⇒ P.61
"ERASE CENTER/BORDER."
You can combine both the Erase Border
and Centering function.
1
Press the [Edit Image] key.
60
2
Press the [Erase Border] key.
3
Set the dimensions of the border width
using the [+] and [-] keys and press the
[OK] key.
4
Set your originals and press the {Start}
key.
Advertisement
Table of Contents
