Ricoh FT7950 Operating Instructions Manual page 51

Note
Do not stack paper over the limit mark; oth-
erwise a skew image or paper misfeeds
might occur.
Draw out the paper support plate when set-
ting paper of a size not smaller than A4
(8 1 / 2 " × 11"
).
L
To avoid a multi-sheet feed, shuffle the
originals before setting them.
Take out any curls or correct any warpage
of the paper before setting.
3
Set your originals and press the {Start}
key.
COPYING FROM THE BYPASS TRAY
When copying onto Thick Paper
Use the Cardboard mode when copying on
paper sizes of 105 - 200 g/m
A Press the [Bypass Tray] key.
L
[Thick Paper] appears in[Bypass Tray].
Important
Copy post cards in the normal bypass copy
mode (you need not use the Thick Paper
mode).
Note
The copy image is copied on the top face
of the paper.
You cannot select following functions for
the Thick Paper mode:
• Interrupt
• Slip Sheet
• Sample Copy
You can select the Thick Paper mode and
Staple together when you select the By-
pass tray for the Cover.
When bypass tray mode copying is com-
pleted, remove the paper out of the bypass
tray and store it in a vinyl bag.
2
(28 - 53 lb).
37