Auto Image Density; Manual Image Density - Ricoh FT7950 Operating Instructions Manual

1
Select one of the image density modes.

Auto Image Density

A Make sure that the Auto Image Density
indicator is lit.
Note
If not, press the [Auto Image Density] key.

Manual Image Density

A Press the [Auto Image Density] key to
cancel it if the Auto Image Density mode
is on.
B Press the image density keys to adjust
the image density. The density marker
[] moves.
2
Set your original and press the {Start}
key.
Half Tone
A Press the [Half Tone] key.
B Press the image density keys according
to the density of the original.
2
Set your original and press the {Start}
key.
BASIC FUNCTIONS
27