Table of Contents
Advertisement
5 Select Special tray
menu
6 Features
menu
Select feature display
& priority setting
Duplex mode prior-
ity setting
Erase centre width
priority setting
Margin Auto shift
Erase border width
priority setting
SETTINGS YOU CAN CHANGE WITH THE USER TOOLS
Tray settings must be made when the special tray is loaded with cover paper, paper
designate paper, recycled paper, translucent paper, or special paper.
You can specify whether the special tray is to be always displayed or only when a tray
is selected.
Select either [No Select] or a tray type for each of the trays for cover sheet, slip sheet,
Recycled Paper, Translucent Paper, and Special Paper.
Select [Mode selected] or [Fulltime].
Specifies whether the feature keys on the left side of the display are to be displayed
and, when turned on, whether they are to be displayed with a priority.
Note
Default: Set
Select the function to be displayed with a priority. Select [Not Priority] to give the
function no priority.
Note
Default: [Duplex/Series Copies].
Specify which of [1 Sided→2 Sided] or [2 Sided→2 Sided] is to be selected by
default when [Duplex] is selected.
Note
Default: [1 Sided→2 Sided].
Sets the default value to be displayed when [Erase Center/Border] is selected.
This mode can be changed as follows:
• Metric version: 0 to 40 mm in 1mm steps.
• Inch version : 0 to 1.6" in 0.1" steps.
Note
Default: 10mm (0.4 ")
Sets the default value of the margin adjustment on the left side of the back page to be
used in the 1 Sided→2 Sided mode.
This mode can be changed as follows:
• Metric version: Left 16 to Right 16mm in 1mm steps.
• Inch version : Left 0.6 to Right0.6" in 0.1" steps.
Note
Default: Right 5mm(0.2 ")
Sets the default value to be displayed when [Erase Border] is selected.
This mode can be changed as follows:
• Metric version: 0 to 20mm in 1mm steps.
• Inch version : 0 to 0.8" in 0.1" steps.
Note
Default: 5mm(0.2 ")
Description
Description
99
Advertisement
Table of Contents
