Table of Contents
Advertisement
7.
[Check Modes] appears when you set a function. To check a set of items you set up, press
[Check Modes]. The settings you made will then appear.
Note
The illustrations here are examples for the machine with the optional sorter stapler unit and
large capacity tray (LCT) installed.
You can display only the function items you are going to use or commonly used function items
with higher priorities (initially selected). ⇒ See page 99 "Select feature display & priority
setting."
You can have paper type displayed on the panel display when you set a special type of paper
such as cover, slip sheet, or recycled paper. For the cover and slip sheet, you can select the
mode in which the paper type is always displayed or the mode in which the paper type is
displayed only when "Cover/Slip Sheet" is selected. ⇒ See page 99 "Select Special tray."
9
Advertisement
Table of Contents
