Ricoh FT7950 Operating Instructions Manual page 4

Ricoh printers operating instructions
Table of Contents

Advertisement

R R
R R WARNING:
R
ii
• Only connect the machine to the power source described on the
inside front cover of this manual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power
cord. Do not place heavy objects on it, pull it hard or bend it more
than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Other-
wise, an electric shock might occur.
• Make sure the wall outlet is near the machine and freely acces-
sible so that in event of an emergency it can be unplugged easily.
• Do not remove any covers or screws other than those specified
in this manual. Some parts of the machine are at a high voltage
and could give you an electric shock. When the machine needs to
be checked, adjusted, or repaired, contact your service represen-
tatives.
• Do not take apart or attempt any modifications to this machine.
There is a risk of fire, electric shock, explosion or loss of sight.
• If the machine looks damaged or breaks down, smoke is coming
out, there is a strange smell or anything looks unusual, immedi-
ately turn off the main switch then unplug the power cord from
the wall. Do not continue using the machine in this condition.
Contact your service representative.
• If metal, liquid, or foreign matter falls into the machine, turn off
the main switch, and unplug the main power cord. Contact your
service representative. Do not keep using the machine with a fault
or defect.
• Do not put any metal objects or containers holding water(e.g.
vases, flowerpots, glasses) on the machine. If the contents fall
inside the machine, a fire or electric shock could occur.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft7970Ft7960

Table of Contents