Ricoh FT7950 Operating Instructions Manual page 30

BASICS
Non-recommended Paper
R CAUTION:
Important
Do not use paper with any kind of coating as follows. Otherwise, a fault might occur.
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper
• Color OHP transparencies
• Paper with perforated kines
• Hammed paper
Do not use copy paper that has been already copied on. Otherwise, a fault might occur.
Note
Do not use the following type of paper because a paper misfeed might occur.
• Bent, folded, or creased paper
• Torn paper
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper that has low stiffness
• Paper with much paper dust on its surface
If you make a copy on rough grain paper, the copy image might be blurred.
Do not use paper which has been copied or printed on.
16
• Do not reuse stapled paper. Do not use aluminum foil, carbon-
containing paper, or other conductive paper. Otherwise, a fire
might occur.