2 Auto reset/Auto off
menu
Auto reset
Low Power Timer
Auto off
User Code Mode Set
SADF Auto reset
AOF
SETTINGS YOU CAN CHANGE WITH THE USER TOOLS
The machine enters the power-on state when you take no action for a
certain period after copy processing is done. Auto reset specifies this pe-
riod. You can adjust this time from 0 seconds to 999.
Note
Default: 60 sec.
The machine turns on the Energy Saver mode and enters the low-power
mode when you take no action for a certain period after copy processing is
done. Low Power Timer specifies this period. When the Energy Saver
mode is reset, the Type 1 enters the Copy mode in 30 seconds (the other
models enter the Copy mode immediately).You can adjust this time from
0 minutes to 240.
Note
Default: 15 min.
The machine enters the power-off state when you take no action for a
certain period after copy processing is done. Auto off specifies this period.
For details on this function, call our service representative. You can adjust
this time from 1 minutes to 240.
Note
Default: 90 min.
The machine enters the user code entry state when you take no action for
a certain period after copy processing is done. User Code Mode Set speci-
fies this period. You can adjust this time from 0 seconds to 999.
Note
Default: 60 sec.
The machine resets the SADF mode when you set no original for a certain
period in the document feeder in the SADF mode. SADF Auto reset
specifies this period. You can adjust this time from 0 seconds to 99.
Note
Default: 5 sec.
Contact our service representative for details on the AOF feature.
Description
97