DO'S AND DON'TS
R CAUTION:
• When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
• When the machine will not be used for a long time, unplug the
power cord.
• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you may feel the exposure glass is heated. But this is not a
malfunction.
• You might feel warm around the ventilation hole. This is caused by exhaust air, and not a
malfunction.
• Do not turn off the main switch while copying. When turning off the main switch, make sure
that copying is completed.
• The machine might fail to produce good copy images if there should occur condensation inside
caused by temperature change. To prevent such trouble, this machine has an anti-condensation
function. Even after the main switch is in the stand-by position, the anti-condensation heater is
active, thus keeping the machine body slightly warm.
• Do not open the front covers of machine while copying. If you do, misfeeds might occur.
• Do not move the machine while copying.
• If you operate the machine improperly or a failure occurs on the machine, your machine set-
tings might be lost. Be sure to take a note of your machine settings.
• Supplier shall not be liable for any loss or damages resulting from failure of the machine, loss
of machine settings, and use of the machine.
5. REMARKS
105