COPYING FROM THE BYPASS TRAY
Use the bypass table to copy onto paper that is not set in the paper tray.
The following sizes can be set in the bypass tray.
Metric version: A3
40 sheets (80 g/m
If you want to make copies on
See page 55.
OHP transparencies and translucent paper should be fanned to get air between
the sheets before loading.
Regarding functions that cannot be used together with this function,
page 94.
Open the bypass table.
Adjust the guides to the paper
size and insert the
Make sure that the [Bypass] key
is selected. If not, touch it.
Set your originals, make your
copies.
54
COPYING FROM THE BYPASS TRAY
:
:
, B4
, A4
2
, 20 lb) can be set at one time.
;
:
copy paper.
:
:
, A5
paper, use the Moving-original scan mode.
see