Finisher-Ad1/Saddle Finisher-Ad2/Puncher Unit-At1 (Optional); Replacing The Staple Cartridge In The Stapler Unit - Canon IMAGERUNNER 5075 Reference Manual

Hide thumbs Also See for IMAGERUNNER 5075:

Table of Contents

Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1

This section describes the procedure for replacing the staple cartridge in the

optional Finisher-AD1 or Saddle Finisher-AD2, and how to remove the punch waste

from the optional Puncher Unit-AT1.

When the optional Finisher-AD1 or Saddle Finisher-AD2 is almost out of staples,

and the staple cartridge in the stapler unit must be replaced, a screen similar to the

one shown below appears on the touch panel display. Follow the procedure

described below to replace the staple cartridge.

Use only staple cartridges intended for use with this machine.

We recommend that you order staple cartridges from your local authorized Canon dealer

before your stock runs out.

Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1 (Optional)

Show Quick Links

Table of Contents