Chapter 8 Configuring Sdm Template; Sdm Templates And Switch Stacks - Cisco Catalyst 3750-X Software Configuration Manual

Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

Chapter 8
Configuring SDM Templates
You must reload the switch with the dual IPv4 and IPv6 templates for switches running IPv6.
Table 8-2
switches running the IP base or IP services feature set. Template estimations are based on a switch with
8 routed interfaces and 1024 VLANs.
On switches running the LAN base feature set, routing values shown in the templates are not valid.
Note
Table 8-2
Resource
Unicast MAC addresses
IPv4 IGMP groups and multicast routes
Total IPv4 unicast routes:
IPv6 multicast groups
Directly connected IPv6 addresses
Indirect IPv6 unicast routes
IPv4 policy-based routing ACEs
IPv4 or MAC QoS ACEs (total)
IPv4 or MAC security ACEs (total)
IPv6 security ACEs

SDM Templates and Switch Stacks

In a Catalyst 3750-X-only or a mixed hardware switch stack, all stack members must use the same SDM
desktop template that is stored on the stack master. When a new switch is added to a stack, the SDM
configuration that is stored on the stack master overrides the template configured on an individual
switch. For more information about stacking, see
You can use the show switch privileged EXEC command to see if any stack members are in SDM
mismatch mode. This example shows the output from the show switch privileged EXEC command when
an SDM mismatch exists:
Switch# show switch
Switch#
------------------------------------------------------------
*2
4
OL-21521-01
Dual IPv4 and IPv6 routing template—supports Layer 2, multicast, routing (including policy-based
routing), QoS, and ACLs for IPv4; and Layer 2, routing, ACLs, and QoS for IPv6 on the switch.
Dual IPv4 and IPv6 VLAN template—supports basic Layer 2, multicast, QoS, and ACLs for IPv4,
and basic Layer 2, ACLs, and QoS for IPv6 on the switch.
defines the approximate feature resources allocated by each dual IPv4 and IPv6 template on
Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Directly connected IPv4 hosts
Indirect IPv4 routes
Role
Mac Address
Master
000a.fdfd.0100
Member
0003.fd63.9c00
IPv4-and-IPv6
IPv4-and-IPv6
Default
Routing
2 K
1.5 K
1 K
1 K
3 K
2.75 K
2 K
1.5 K
1 K
1.25 K
1 K
1 K
2 K
1.5 K
1 K
1.25 K
0
0.25 K
0.5 K
0.5 K
1 K
0.5 K
0.5 K
0.5 K
Chapter 5, "Managing Switch Stacks."
Current
Priority
State
5
Ready
5
SDM Mismatch
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Understanding the SDM Templates
IPv4-and-IPv6 VLAN
8 K
1 K for IGMP groups
0 for multicast routes
0
0
0
1 K
0
0
0
0.5 K
1 K
0.5 K
8-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-x

Table of Contents